Crucial P2 SSD Data Recovery

At Zero Alpha Data Recovery, we offer professional data recovery for Crucial P2 SSDs. These NVMe drives are popular for their speed and affordability but can fail suddenly due to firmware or controller issues. If your P2 has become unresponsive or is no longer recognised, we’re here to help. We also accept mail-in jobs Australia-wide, so you can send your drive to us from anywhere with ease.

Crucial P2 SSD Common Problems

• SSD not detected in BIOS or OS

• Drive shows 0MB capacity or disappears randomly

• Firmware corruption or controller failure

• Data loss after firmware update

• Drive stuck in read-only mode

• Files suddenly missing or corrupted

• Blue screen errors (BSOD) during use

• NVMe not recognised on newer motherboards

• Partition shows as RAW or unallocated

• Power-related damage or failure

P2 M.2 2280 500gb CT500P2SSD8 data recovery caselog

20DEC22 - SSD Power input is 3.3Volt. 2.5Amp PCIe Gen3 x4 speed. This SSD was sent to us via a computer shop who did not get it to detect. The original problem is that the SSD did not detect in its m.2 slot. Controller problems are supported via Ace. SMD components were tested and found a rail that was short to ground. A working donor SSD was supplied where correct measurements and behaviours were able to be tested. Thermal imaging showed that the controller had no energy flowing to it but slight termal activity was picked up on the 8 pin EK 65 chip. There were 6 ceramic capacitors and a 2H Zener diode on this line. The diode and 8 pin chip were taken out of circuit and tested ok. The faulty component was the ceramic capacitor which only showed thermal activity above half amp. All data was recovered without the need for mcu solutions.

Crucial P2 M.2 2280 500GB SSD. Damaged componenets are highlighted in yellow