Intel SSD 330 Series Data Recovery

At Zero Alpha Data Recovery, we offer professional data recovery for Intel SSD 330 Series drives. These older SATA SSDs were popular for system upgrades but are now increasingly prone to failure due to aging NAND, firmware issues, or controller faults. If your 330 Series SSD is no longer recognised or you've lost access to important data, we can help. We also accept mail-in jobs Australia-wide, so you can send your drive to us from anywhere.

Intel SSD 330 Series Data Recovery 120GB ssdsc2ct120a3

Intel SSD 330 Series Common Problems

  • SSD not detected in BIOS or Windows

  • Drive shows as 0MB or incorrect capacity

  • Partition appears as RAW or unallocated

  • Freezing or very slow performance

  • Sudden loss of files or OS failure

  • Firmware corruption or SandForce controller issues

  • Drive stuck in read-only mode

  • Blue screen errors (BSOD) during use

  • Electrical damage or power surge effects

  • System won't boot from SSD

SSDSC2CT120A3 DATA RECOVERY CASE LOG

06JUN23:

This ssd was causing problems for a windows pc to fail to start properly. the smart log contained 2 errors for the reallocated sector count. All data was recovered using data extractor tools

Model : INTEL SSDSC2CT120A3
Serial : CVMP24160131120BGN
Firmware : 300i
Capacity : 120 GB (234 441 648)

Password set............................ : No
 
Device configuration overlay............ : Not supported
Capacity................................ : With no restrictions
 
S.M.A.R.T. drive status................. : GOOD
----+--------------------------+-------+-------
 ID | Attribute                | State | Value 
----+--------------------------+-------+-------
  5 | Reallocated Sector Count | Raw   |     2 
----+--------------------------+-------+-------
S.M.A.R.T............................... : Contains drive malfunction flags
 
Look ahead.............................. : Disabled
Write cache............................. : Granted
Error recovery control.................. : Not supported
 
S.M.A.R.T. Data reading................. : Ok
 
Test "Reading" started
Initial LBA............................. : 0
Final LBA............................... : 234 441 647
Read with a single command.............. : 2048
Reading method.......................... : Regular
Data exchange mode...................... : UDMA133
Save data read to file.................. : No
Save defects............................ : No
Test "Reading" interrupted
Duration................................ : 0:02:40
 
Drive power supply...................... : OFF